Centrapol Return XHD

Centrapol® RETURN XHD

He CENTRAPOL® Load is based on an improved load reception system that allows quick activation, better balancing and overall performance. Does not cause damage to the sides of the strap.

Central Pivot
The moment the belt leaves its center moving over the lateral rollers, these cause the CENTRAPOL to rotate on its central pivot, directing the belt towards its center again.

- Ángulo de artesa variable
- Ajustable a variados anchos de mesa
- Tapas metálicas que eliminan la posibilidad de incendio y desplazamiento axial por exceso de esfuerzo

Download Technical Sheet

CENTRAPOL® RETURN XHD

CENTERING EQUIPMENT FOR HIGH LOAD SPECIAL DOUBLE ROLLER RETURN WITH PIVOT ENCAPSULATED SYSTEM.

It allows adjustment in height, angle and width of anchorage in its double version.

Pivot encapsulated with bearings, ensures complete protection to the operation.

Models covered in rubber and polyurethane.

Manufactured under the CEMA standard, available in two versions:
Double Return / Double Return in V XHD

CENTRAPOL® XHD version

Return Centrapol® Tec Rapol® exists in two configurations; one for normal load conditions (Centrapol®) and the other for high load and speed conditions, and various belt spans (Centrapol® XHD).

Both versions differ in how their rolling system is structured, with tapered bearings as the main element.
This allows the XHD equipment to have an even performance, regardless of the nature of the load submitted (axial or radial).

This version has rollers with a larger diameter (203mm) and are exclusively coated that already exists in its normal version, so the dimensions between teams are the same.

KEY POINTS CENTRAPOL® XHD

TEAM OF BEST PERFORMERS IN HIGH LOAD AND SPEED CONDITIONS

HIGH PERFORMANCE BEARING SYSTEM.

COMPLETELY FIREPROOF IN ITS ROLLING COMPONENTS.

PROVEN EFFECTIVENESS IN INTERNATIONAL FAENAS (BRAZIL)

BEARING

The bearing used is specifically the one that remarkably improves performance and service life in heavy-duty conditions, an excessive demand causing constant follow-up (due to the positioning of the pulley, table structural problems, etc., it closes parentheses and pronounced, where a Normal range equipment would have a useful life produced by the radial load that affects the system.In nominal conditions the bearing will have an expected useful life of 40,000 hours of operation, taking into account that the dynamic radial load should not exceed 163,000 [N] .

In addition to the above, there is a triple follow labyrinth, which completely protects the bearing from any external element that may intervene in its correct operation.

TECHNICAL INFORMATION

THIS TYPE OF EQUIPMENT CAN OPERATE AT RATED SPEEDS OVER 10.

LARGE WIDE BELTS UP TO 108 INCHES WITHOUT LIMIT.

IDEAL EQUIPMENT FOR MATERIAL LOADS OVER 12,000 [t / h] (EQUIPMENT INSTALLED IN FAENA VALE, BRAZIL)

THE MAXIMUM LOAD THAT THE EQUIPMENT WILL SUPPORT IS 3.5 [t]

OWN EIGHT INCH ROLES IN DIAMETER

DOUBLE POLYURETHANE RETURN

DOUBLE V-RETURN POLYURETHANE

National quality with international standards

En Tec Rapol ofrecemos la gama más completa y versátil de piezas de transportadores en el mercado, con calidad internacional y alta capacidad de producción. Preferir productos nacionales entrega un mayor respaldo en post venta y una garantía única.